Creating T-shirt Display Boards

We decided to display some of our proudest work of the jobs we’ve printed on the walls of our office. You will find instructions on how to recreate t-shirt display boards for your office, store front, or even your room. Its a very easy and inexpensive and professional looking way to show your product off to your customers and visitors.

Here is what you will need:
-Staple gun (don’t go cheap or else you will be kicking yourself later)
-Quality scissors (again quality tools are going to make this go A LOT smoother)
-Push pins (not tacks)
-A bunch of pre-stretched canvas from your local craft store. I found 14×18 worked for me.

materials needed

Okay so pretty straight forward. Slide the canvas inside the shirt and position it how you want it.
Start stapling from the top (neck hole) 1 staple every 2-3 inches should do it.

Then once the top part is done, pull the bottom tight and staple that area, then do one side, than the other. Once thats that done cut all the area of the shirt around the staples and tighten up any loose ends. It should look like the picture of the back Ive attached.

Now repeat for each t-shirt you want to display.
staple-t-shirt
finished-canvas

All thats left is to hang the shirts I used 2 push pins to hang them on so they can easily be taken off the wall to change or examine them. Now just find a good way to measure them from each other so they look aligned (I measured 15″ from my ceiling and gave them a small gap from one another)

t-shirt-wall-display
t-shirt-wall-display-board

Thats it! Good luck and watch your fingers!